Mode l# 1000 Knife Crusher

Short Description:

Scope of use: Suitable for plastic steel,buckle board,ecological wood,angle line,stone plastic sleeve wire, profile, wallboard, pipe, XPS, building template, foaming board, SPC,WPC floor, resin tile


Product Detail

Product Tags

Scope of use

Suitable for plastic steel,buckle board,ecological wood,angle line,stone plastic sleeve wire, profile, wallboard, pipe, XPS, building template, foaming board, SPC,WPC floor, resin tile

Parameter Display

Model#

1000

Output(KG/H)

500-1500

Voltage

380V

Power(kw)

30KW

Blades

15+6

Screen mesh(mm)

10-30

Feed height(mm)

1460

 Feed throat(mm)

1000*330

Shape size(mm)

2000*1530*1460

Weight(KG)

1200

30KW three-phase asynchronous motor parameter

Model

Yx3-200l-4

Factory NO.

A1.

Power

30KW

Voltage

380V

Electricity

57.6A

Weight

250KG

Rpm

1470 r/min

Standard NO.

JB/T18613-2012

3

Working Principle

During production and operation, the motor drives the spindle and turbine to rotate at high speed (the maximum speed can reach 700R / min). The turbine and the grinding block on the screen ring form a crushing and grinding pair with compact structure. When the material enters the chamber from the hopper, the material entering the chamber rubs tightly and impacts strongly on the inner edge of the turbine blade in the rotating air flow, and then grinds again in the gap between the blade and the grinding block. While crushing and grinding materials, the turbine sucks in a large amount of air, which plays the role of cooling the machine, grinding materials and conveying fine materials: the fineness of material crushing depends on the properties of materials and screen size, as well as the throughput of materials and air.

A special labyrinth seal is installed in the bearing part of the knife crusher, which can effectively prevent the dust from entering the bearing cavity, thus prolonging the service life of the bearing. There are two O-shaped rubber sealing rings in the door, so there is no dust leakage to pollute the operating environment.

Difference between Model#650 and Model#1000

1. Motor power 30KW is more productive than 22KW motor.

2. Feed throat and shape size of Model#1000 is bigger than Model#650, and it can accommodate more material.

3. More blades, faster breakage.


  • Previous:
  • Next:

  • Write your message here and send it to us